Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Reseda, CA
Chimney repair in Reseda starts with one question: did the 1994 Northridge earthquake compromise the structure? Most homes here are single-story 1950s – 60s ranch tract builds with original clay tile liners that have baked through decades of San Fernando Valley summers, and the quake’s epicenter sat only a few miles away. That combination means our technicians in Reseda see cracked flue tiles, loosened mortar joints, and shifted crowns far more often than simple soot buildup. We sweep, inspect, and repair in one visit, so what starts as a cleaning often becomes a liner and crown assessment. Call (833) 593-4098 for a free estimate.
Why Reseda Homes Are Different
Reseda’s chimney stock reflects the neighborhood’s postwar building style. The original masonry fireplaces in these 1950s and 1960s tract homes were built with clay tile flues that many homeowners have never replaced. After 60 or 70 years of heat cycling, the tiles crack, and the mortar between them erodes into sandy grit that ends up in the smoke shelf. Add the 1994 Northridge earthquake to that timeline. The shaking loosened chimney crowns and top-course brick across thousands of Valley homes, and what looked cosmetic at the time sometimes opened hairline gaps that have widened slowly since. Reseda’s hot, dry summers bake whatever creosote is in the flue into a hard glaze that a basic brush cannot always break loose, and Santa Ana wind events push debris and soot back down the flue. When winter arrives and Reseda homeowners burn wood on permitted burn days, the chimney finally gets used hard for a few months. That cycle – long idle periods, glazed creosote, seismic stress, then heavy use – is why every Reseda job begins with a structural check before cleaning.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Reseda Services
Reseda homeowners most often call us for two services: a full chimney sweep and dryer vent cleaning. Both address hidden fire risks, and because we do both, one appointment can handle two of the most common household ignition sources.
Chimney Sweep in Reseda
A Chimney Sweep in Reseda is rarely just a brushing. In these mid-century ranch homes, we know the flue has likely seen decades of wood fires, and the dry Valley summers have hardened whatever creosote is inside. Our sweep removes the glazed deposits, then we check the liner and mortar for the hairline damage the 1994 earthquake left behind. Creosote can look minor on the surface while hiding a structural problem behind it. The result is a clean flue and a clear picture of whether any repair is needed.

Dryer Vent Cleaning in Reseda
Clothes dryers in Reseda work harder than homeowners realize, especially during dusty Santa Ana stretches. Lint builds up inside the vent run, and the Valley’s dry air makes that buildup especially easy to ignite. Our Dryer Vent Cleaning in Reseda removes the accumulated lint from the full vent run and confirms airflow is moving correctly. Many Reseda homes have long or offset vent paths from 1950s laundry rooms, which trap more lint than newer designs. We check the terminations at the roof or wall and leave the vent clear, so the dryer runs cooler and safer.

Chimney Repair in Reseda
When we find a problem during a sweep in Reseda, we fix it. Most of these chimneys were built with clay tile liners that have cracked from decades of heat cycling, and the 1994 Northridge earthquake – whose epicenter was only a few miles away – loosened crowns and mortar joints on thousands of homes. What looks like a simple cleaning often becomes a repair quote backed by camera inspection photos the homeowner can see. Our team works with professional-grade materials like DuraFlex and HeatShield, so a reline or resurfacing job uses the same trade-level products a specialized Chimney Repair contractor would specify. We arrive trained to assess and restore, not just clean and leave.
Chimney Cap Installation
Signs you need it
Rain-streaked brick, bird or squirrel sounds from the flue, or debris inside the firebox when the damper opens are all signs the flue is open to the sky.
What it costs in Reseda
Chimney cap installation in Reseda typically runs $180 – $340, depending on the flue size and whether a custom bracket is needed for an older terra cotta crown.
How we do it
We measure the flue opening, select a properly sized cap from our local stock, secure it to the crown, and verify the draft is unaffected.
Chimney Crown Repair
Signs you need it
Cracks running across the concrete crown, loose mortar along the top few courses, or water staining on the ceiling near the chimney are the classic indicators.
What it costs in Reseda
Chimney crown repair in Reseda typically runs $450 – $850, with the higher end covering extensive recrowning after seismic shifting.
How we do it
We clean and prep the existing crown, fill or resurface it with a weather-resistant material from our professional lineup, and correct the slope so water sheds away from the flue.
What Chimney Repair Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Chimney cap installation/replacement | $180 – $340 |
| Chimney crown repair | $450 – $850 |
| Chimney liner installation (DuraFlex) | $2,800 – $5,200 |
These are estimated ranges only. Every Reseda chimney is different, and the written estimate after our inspection sets the final price.
How do I know if my chimney has earthquake damage?
Loose or cracked mortar at the chimney’s top courses, a crown with visible hairline splits, or water entering the firebox after rain are the most common indicators in Reseda. Our camera inspection shows the flue liner’s actual condition, so you see exactly what we see before any repair is recommended.
Do I really need a new liner, or can the old one be repaired?
It depends on the damage. Hairline cracks can often be resurfaced with HeatShield, while spalling tiles or a liner that has fully separated usually requires a DuraFlex reline. We show you the camera footage either way, so nothing is recommended without evidence. Call (833) 593-4098 for an exact quote – estimates are free.
Brands We Service in Reseda
We stock and install parts from Copperfield, DuraFlex, HeatShield, and Gelco. These are professional chimney industry brands, not big-box substitutes. Our Reseda van carries common cap sizes, flashing materials, and crown repair products, so many repairs wrap up same-day. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Reseda, CA
| Service | Typical range in Reseda |
|---|---|
| Chimney sweep (standard masonry fireplace) | $189 – $349 |
| Chimney sweep (prefab/factory-built fireplace) | $199 – $379 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $180 – $340 |
| Chimney crown repair | $450 – $850 |
| Chimney flashing repair | $350 – $850 |
| Chimney liner installation (DuraFlex) | $2,800 – $5,200 |
| HeatShield resurfacing | $2,200 – $3,800 |
| Dryer vent cleaning | $129 – $249 |
What pushes a Reseda job toward the higher end is usually access: steep roof pitches on some 1960s ranch builds, chimneys boxed in by later room additions, or seismic damage that requires more prep before repair. You’ll get a firm written estimate before any work begins, and we never upsell a repair without camera evidence backing it.
Neighborhoods We Serve in Reseda
Our technicians know Reseda’s tract layouts well, and we’re typically able to reach most calls quickly because of the neighborhood’s grid. Service covers the full city, including these areas:
- Reseda Ranch
- Lake Balboa-adjacent streets
- Melody Acres
- Sherman Way corridor
- West Reseda / 91335
Service Area – Cities Near Reseda
Our chimney and dryer vent services extend across the western San Fernando Valley. We regularly work with homeowners in Northridge, CA and Winnetka, CA, both of which share Reseda’s postwar ranch stock and seismic history. We also serve Canoga Park, CA to the west and Woodland Hills, CA to the south. Same crew, same professional-grade materials, same camera-backed repair process.
Serving Reseda, CA – Our Local Coverage Area
We serve Reseda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Reseda
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Most Reseda calls are booked within a day or two, and a call outside dispatch hours goes into the next opening. We do not work on Saturday.
Permit requirements vary by the scope of work and the specific Reseda property. Liner replacements and structural repairs sometimes need city approval, while routine sweeps and cap replacements usually do not. Ask your city’s building department, and we’ll tell you what our work would involve on your estimate.
Yes, though access rules for shared chimneys can differ. Some Reseda apartment buildings have multiple flues tied into one stack, and we’ll coordinate with the property manager or HOA before scheduling. Individual condos with their own fireplaces are straightforward to service.
Call (833) 593-4098. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and every repair recommendation comes with camera evidence you can see for yourself.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so he showed up with the part already on the truck."
- Diego Hernandez"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Ernesto Herrera"What sold me was that he told me what NOT to do. I was ready to spend a lot more than I needed to and he stopped me. Ended up costing about a third of what I'd budgeted."
- Amanda Quinn